An Effective and Economical Waterproofing System
DESCRIPTION
 Perma Shield is a milky white liquid which has excellent waterproofing and protection properties. Perma Shield is effectively used in arresting nagging leakages and dampness from walls and protecting exposed reinforcements.
 PRIMARY USES
 1) For waterproofing terraces.
2) For arresting rising dampness.
3) For protection of exposed reinforcing steel rods.
4) For water proofing leakages from toilet units and sunk slabs.
5) For water proofing damp walls.

SURFACE PREPARATION
Surfaces to be treated with Perma Shield should be clean free from oil, grease and loose particles. All laitence and loose particles should be removed by wire brushing or mechanical scabbling. All undulation and cracks should be made good using Perma Crack fill or Perma Rapid Repair systems. In case of badly honey combed surfaces give a layer of screed or plaster to make it worthy to re

PERMA SHIELD SYSTEM
The system consists of application of 1 or 2 Barrier Coats depending upon severity of problem. In severe cases apply three Barrier Coats. Plaster immediately where desired.

PERMA
SHEILD		 CEMENT COVERAGE
Barrier coat 1 Ltr +   2 kg

35-40 sqt/
coat.

DIRECTIONS FOR USE
 1. Seepages and dampness through walls.
a) Remove the entire plaster.
b) Apply one coat of plaster and cure it for 7days.
c) Apply one coat of Barrier coat and immediately complete the second coat of plaster and cure normally.
2.Leakage from sunk slabs of toilets.
a) Stop the use of upper floor toilet till the dripping  stops.
b) Remove the plaster or scrape the concrete. If  the surface to be applied is concrete only which is sound then use the surface directly.
c) Apply two Barrier coats and plaster the surface immediately.
3.Terrace water proofing
a) On the prepared terrace surface apply two Barrier coat or one Barrier coat followed by Plaster or IPS.
4.For protection of exposed reinforcing steel.
a) Clean the rods and apply two Barrier coats.

 PROPERTIES
Form   

Liquid
Colour    Milky White
Ph    10
Stabilisation Non-Ionic
Antioxidant    Non-Ionic
Bacteriocide    yes
Antifoam    yes
Minimum film  forming temperature 5oC


PACKING
Perma Shield is supplied in 1 litre and 20 Litres containers.		 SHELF LIFE
Two years if kept sealed in original packing in cool and dry place.

group.gif (590 bytes)next.gif (435 bytes)