SPECIFICATION
BS 5980:1980, Draft CEN:prEN 12004 -1997		 PRIMARY USES
1. For fixing ceramic tiles on concrete or mosaic floors.
2. For fixing granite slabs on concrete floors.
3. For fixing marble slabs on floors.
4. For fixing skirting on the walls.
5. For fixing glazed, ceramic tiles to walls & floor areas.
DESCRIPTION
Perma Liquid Tile Adhesive is a complex polymer based white liquid that is added to the bedding mortars used for fixing ceramic tiles,granite slabs or marble slabs on horizontal surfaces. Liquid Tile Adhesive dramatically enhances the adhesive,tensile and waterproofing properties in the mortars so that it prevents weeping joints in the floors and skirting. The product can be added to neat cement as well, to improve the properties of the paste.		 GUIDE TO APPLICATIONS
A. For fixing ceramic tiles, granite slabs, marble slabs to the concrete floors
Dry mix 15kgs of cement (use white cement for fixing marble) with 50 kgs of fine sand.Add two Ltrs of LTA and water to get the desired consistency. Lay the mortar on the floor and spread it evenly. Press the ceramic tiles, granite or marble to position.

Mix Cement 

 15 kgs

Fine Sand 50 kgs

1:2 by volume 

Perma LTA                 

 2 Ltrs

Water                         

 2 to 3 Ltrs

This mortar is sufficient to fix 37 sq.ft of tiles with a 5 mm thick bed.

B. For fixing ceramic tiles, granite or marble on existing mosaic floor :
Dry mix 15kgs cement (use white cement for fixing marble) with 15 kgs of fine sand passing 300 micron sieve or use quartz or silica powder. Add two litres of LTA and water to desired consistency. Prime the back of the tile and the mosaic floor just before laying of the mortar with LTA mixed in the proportion of 1:1 by volume. Lay the smooth consistency mortar on the primed tile or slab to position. Please note that the brush applied primer has a tendency to dry quickly. Hence prime the tile, granite or marble just before fixing.

 
TILE & FLOOR PRIMER

Cement                1 kg
Perma LTA           1 Ltr

This covers about 20 to 30 sq.feet.
Mix Cement  15 kgs}
Quartz/Silica Powder  1:1by volume
Very fine sand  25 kgs }
Perma LTA  2 Ltrs
Water  2 to 3 Ltrs
This mortar is sufficient to fix 42 sq.ft on tiles on existing mosaic with a 3 mm thick bed.
PROPERTIES
Form  Liquid 
Color  Milky White
Specific Gravity  1.15 at 20oC 
Chemical nature  Anionic
PH  8 to 9 
Solubility Mixes freely with water
Application temp  above 50C 
Toxicity  Nontoxic to contact
Partial size  1 micron
Anti Oxidant  Yes
Bacterocide  Yes
Antifoam  Yes
ADVANTAGES
 1) Liquid Tile adhesive waterproofs the tiled area 
2) Improves adhesion and tensile strengths mortars
3) It is economical. 
4) Easy to use.
5) Non toxic.
SHELE LIFE
Perma WPA has a shelf life of 12 months if stored in manufacturer's' original packing in a cool and dry place away from moisture and heat.
PACKING
Perma Weatherproof Adhesive is available in 1 kg Corrugated printed carton and 10 Kg and 25 Kg multi-wall laminated sacks