D:\perma\pseal.html

DESCRIPTION
Perma Guard is a polymer modified cementitious acrylic water proofing system with a very wide scope of applications in water proofing and corrosion inhibition situations. Perma Guard is a two component material which forms a flexible membrane upon curing.

PRIMARY USES
Perma Guard has been found to perform exceptionally with following applications:
1) RCC terrace waterproofing.
2) Sealing leakage through cast iron, asbestos or
    stoneware pipes.
3) Coating on bridge girders and under deck
    waterproofing of bridges.
4) Sealing cracks in asbestos cement sheets and
    sealing `J' bolt openings.
5) Coating on leaky plaster surfaces.

ADVANTAGES
1) Perma Guard membrane when applied on concrete surface allows the concrete to breathe normally while waterproofing the treated area perfectly.
2) Perma guard membrane is flexible hence accommodates deflection and minor movements of the structures.
3) Being acrylic based Perma Guard has strong adhesion and corrosion inhibition properties.
4) It is easy to use. Just mix the premeasured and packed liquid and powder components of Perma Guard and brush apply.

DIRECTIONS FOR USE
1) Clean the area to remove all loose particles, oil, grease and any such deleterious products and wet it with water. If the surface is rough mix Perma Guard liquid and water in the proportion of 1:2 and brush apply on pre wet surface.
2) Mix the powder and liquid ingredients of the product thoroughly to form a smooth consistency slurry.Avoid part mixing the ingredients of packing.
3) Brush apply Perma Guard slurry on the surface to be treated.
4) Immediately cover the treated surface with cement sand 1:4 plaster and cure normally.

ACTION
When the two components i.e. acrylic liquid and polymer modified cementitious powder is mixed a smooth consistency slurry is obtained. This slurry when brush applied on the surface to be treated forms a flexible film which has very strong adhesion to the applied surface. The film is totally waterproof and resistant to chemical and pollution attacks.

PROPERTIES

INGREDIENT	PART 1	PART2
FORM	Powder	Liquid
COLOUR	Grey	Milky
	Offwhite	White
SPECIFIC GRAVITY	-	1.02
BULK WEIGHT	1.11 kg/ltr.	-
PHYSIOLOGICAL	Like	Like
EFFECT	Cement
TOXICITY	Non	Non
	toxic	toxic

PERFORMANCE DATA

ELONGATION AT BREAK	35%
MAX. WATER PRESSURE	7 Bars + ve side
	6 Bars - ve side
VAPOUR PERMEABILITY	0.0991 mg/mı/hr.

COVERAGE
Perma Guard covers 5 to 6 sq.ft. per kg.

PACKING
Perma Guard is available in premeasured (Powder +liquid ) Packs of 10 kg/ltr and bulk.

SHELF LIFE
Perma Guard should be stored in cool and dry conditions away from moisture and direct sunlight