Bonding Agent for Plasters & Admixtures for Repair Mortars

PRIMARY USES
1) As a bonding agent for cement screeds, render, plaster and concrete.
2) As an admixture in mortars for repair work.
3) As a sealer coat.

ADVANTAGES
1) Many applications in repair works from just one product.
2) Economical when compared with SBR and epoxy products in similar application.
3) Easy to use - The product functions in all critical    application methods.
4) Quick drying and strong adhesive property.

DIRECTIONS FOR USE
1)  AS BONDING AGENT:
First dilute Perma Bond with water in the
proportion of one volume of  to three volume of water and use it as a Primer on the prepared surface and allow it to dry out in 6 hours time or it can be left overnight. Then dilute Perma Bond with water in the proportion of 1:1 and brush apply on the primed surface. This forms the bonding coat. When the bonding coat is still tacky apply the mortar or screed or plaster. To ensure better bond strength the mortar or screed can be admixed with Perma Bond at the rate 5% by weight of cement.

2)  AS ADMIXTURE IN REPAIR SCREEDS AND
    MORTARS:
a) Mix for light duty screeds and repair mortars
     

b) For heavy duly screeds and Industrial floor repair