DESCRIPTION
MASTER FLOOR-HD is a high performance epoxy resin based concrete that provides a rough looking extremely strong bedding mortar or screed mortar to industrial floors.

ADVANTAGES
1) Abrasion resistant and hard wearing.
2) Slip resistant.
3) High Strength.
4) Easy to handle.
5) Resistant to chemicals and aggressive
substances.

TYPICAL PROPERTIES

Density	2000 kg/m3
Pot Life	45 min at 250C
Shelf Life	6 months
Compressive strength	65 n/mm2
Tensile strength	12 n/mm2
Flexural strength	28 n/mm2

COVERAGE
MASTER FLOOR-HD covers 0.50 sq. ft. to 1.50 sft per kg. depending upon the thickness of the screed

PACKING
MASTER FLOOR-HD is supplied in 10 kg pre weighed units and in bulk.

DIRECTIONS FOR USE
Surface preparation :
As with all epoxy resin systems, surface preparation is of prime importance. For concrete surfaces, remove all grease, oil, dust, laitence, etc. Ensure substrate to receive the screed is sound, cut back to sound surface wherever necessary.
Primings :
Remove dust and ensure that all the surface is dry. Prime with MASTER PRIME-CN
Mixing :
Do not split packs or alter the components in any way. Mix in a suitable mechanical pan type resin mixer. Thoroughly mix both liquid components together prior to the addition of the aggregate component. Remix until the aggregate is completely dispersed.

Application
Tip or apply the mixed MASTER FLOOR-HD onto the primed surface - the primer must still be fully tacky. Rake or spread out to the thickness required compact and finish with a steel trowel.

SPECIFICATION CLAUSE
MASTER FLOOR-HD shall be laid on suitable prepared surfaces where indicated. MASTER FLOOR-HD is manufactured to the following specifications.

Composition	3 component solvent free epoxy resinbased system filled with aggregates.
Density	2000 kg/m3
Compressive strength	65N/mm2
Tensile strength	12N/mm2
Flexural strength	28N/mm2
Chemical Resistance	Excellent - to a wide range of chemicals, oils, etc.

HEALTH AND SAFETY
Epoxy products generally cause irritation to the skin. Use of hand gloves by the workers is advised. Upon completion of day's work all the packing material should be burnt and buried.